Recent content by CatchyUserName

The part is going to be delivered to my tester soon. I know the dimensions are good on the bearing side, but I need to confirm the fit to the steering column tube. Stay tuned! You may want to confirm that this is the part you are looking for. As far as I know, this is a 67 only part. Although...

Not the best looking print, but it should work for testing!

just an update... found a couple needed adjustments, and I hope its the last one before sending out for a test fit. Although, one of my other parts started selling a lot, and is taking up all print time. this is on hold for a short while. will update after next print

Also, there is a hard speed limit with stuff like this... I tried for days to get it to print faster, but it was just not working well for strength. Any time you print really fast, the layer adhesion plummets. I really wanted an x1 Carbon, but then I saw a test somewhere, showing that high speed...

The real trick with mine was getting the machine to allow high temps. Had to compile my own firmware.

Microswiss Mosquito hotend, and a ruby tipped .4 nozzle. both I would highly recommend.

okay, so I need to move my holes. This is actually a good thing, because the bearing will be more secured into the tube.

It is FDM. I wish I could do resin for detail, but those materials can't compete with this. The machine use to be an Ender 5 Plus, but there is not much of the original unit now. Aftermarket motherboard, extruder/hotend assembly, z axis ball screws, enclosure, slide bearings, and a lot more. The...

reference pics

Thanks for checking! You are the second one, but I wasn't too confident in the last persons measurements. One dimension I don't think I have written down on the spec sheet, is the OD of the tube. Kind of nice to see that I can reach tolerances of 0.002" with this printer. Just received the...

Appreciate it!

I have posted a similar part in forums on here recently, and there was more interest in it than I thought there would be. If its going to be something I offer for purchase, I thought I should make something a little more up to finished product standards. This is almost a complete redesign of...

I think that would work for a temporary solution, but I've been wrong many times. I think a bushing would wear quickly in this application. Also thought a roller bearing could work, but that's transferring the wear to the shaft. There are other ideas im playing with, but if this works, it's the...

I could do just the retainer, if it matches the dimensions on your bearing. The whole set would be the retainer, bearing, two set screws, and two nuts. I was planning $55+ shipping. Could do half for the retainer. Wish I could do less, and it still be worth it... I know people think all 3d...

That's a good kit, if you want a full rebuild kit. What I'm making is going to be just the lower bearing assembly, and less than half that price.