The diameter of the bar is about 3/4 inch. The link arrangement is on the bar, both sides. Brackets are a no. The brackets I have are on my car with a bar. The frame rail brackets are just a U-shaped bracket similar to 1976 Charger and attach in a similar fashion. The brackets at the springs are...
Sway bar came from a 1976 Dart. Asking $300 (make an offer). Plus shipping costs from 93021. Or local pick up. USPS money order acceptable; part ships when money order clears. For local pick up, bring cash. PM to discuss. Thanks.
Your rear sway bar install is very good per PST instructions. However, be aware that the little u-bolt in the frame rails is a weak point in the design. About thirty years ago, I saw one of those u-bolts pulled right through the frame rail metal on a 1975 Chevy Nova (a southern California car...
My suggestion is if the bar is otherwise clearing the K-frame, use the forward bolt location of the bracket off the K-frame to mount the bushing clamp forward end (longer bolt of course, (use grade 8s)), drill a new hole for the rear of the bushing clamp to bolt on to. Use wide thick washers at...