Recent content by cezagonel

Well, After i disassembly and assembly the heads and intake, nothing change. I tried change the water pump, put a mopar hi-volume pump and surprise, the temperature was much better. I think there wasn't enough water for the aluminum heads. Thank everybody for the help. Carlos

What is the expected temp in the exhaust headers? Thank you, Carlos

The head gaskets was right. I removed the heads yesterday and the gaskets were correctly installed. Thank you, Carlos

Yes, was the break in. The engine run about 20 minutes. After that i run more two or tree times about 5 minutes. Everytime the headers of the cylinders 6 and 8 heated early. The coolant temperature was good, like 180ºF. But in this time was without thermostatic valve, is it a problem? Thank...

I don't think it's the carb, soo. I use a holley dp 650, and change for a holley dominator 750 to test, nothing change. Probably tomorrw i will get news, because yestarday i change the heads of the side. I will reassembly the intake, may be if there are some problem in the intake gasket it...

Hi, I'm a Brazilian guy. I have one brazilian Charger R/T 1976, like a American Dart 1969. Well, this Charger, originally was 318, the only engine made in brazil. I make one 360, with a scat crank and proper pistons. This engine was assembly with Eddy heads, performer rpm intake, headmann...