ch1ll's latest activity

  • C
    ch1ll replied to the thread Small Blocks.
    That is ridiculous, any difference would be made up in lifter preload. Anyway how much can a stock or stock production pushrod set vary...
  • C
    ch1ll reacted to Garrett Ellison's post in the thread Small Blocks with
    Like
    .
    Thick cylinder walls like in the ‘75 and earlier 360 blocks, filled in webbing like the T/A, X, and R blocks, blind bolt holes...
  • C
    ch1ll replied to the thread Small Blocks.
    Still what I said is true and stock class racers will run a matched set. It’s a lot of work to match a set, but it can be done and there...
  • C
    ch1ll replied to the thread Small Blocks.
    Ever drive a big block Dart or Barracuda? A 340 Dart will outrun a 383 Road Runner in the quarter mile.
  • C
    ch1ll reacted to Dana67Dart's post in the thread Small Blocks with
    Agree
    .
    I would seperate the exhaust ports to be like on a SB Ford
  • C
    ch1ll replied to the thread Small Blocks.
    No it would not. You use a shorter, lighter piston with a shorter pin height. Rods would stay the same length. The stroke of a 360 is...
  • C
    ch1ll replied to the thread Small Blocks.
    Those sloppy rocker arms are an engineering marvel, they are light weigh and have excellent oiling design due to flood pool. The only...
  • C
    ch1ll replied to the thread Small Blocks.
    So what, its a small block.
  • C
    ch1ll replied to the thread Small Blocks.
    Correct lifter bore angle, thicker cylinder walls and shorter deck height, lighter pistons with shorter pin height. Six head bolts per...
  • C
    How do you know the intake is too high? By alignment of the ports or by the gap on the China walls?
  • C
    Okay, maybe your TA’s have an issue. I was just speaking from my experience with mine. Anyways y’all are stuck in the 70’s/80’s, there...
  • C
    Try this. It worked awesome on my BFG A/T tires in the mid 80’s.
    • 7F0914EA-4C5E-45EB-B918-B45548E63195.png
  • C
    ch1ll replied to the thread Another NPK question.
    I believe with the costs of putting on a show of this caliber, prices are reasonable. The cost of the liability insurance alone has to...
  • C
    ch1ll replied to the thread Another NPK question.
    Just think of the money those guys have in their cars to run in the 3’s in the 1/8 mile. You don’t see them with major sponsors pasted...
  • C
    ch1ll replied to the thread Another NPK question.
    You want to attend a high end race? It costs a lot. Price NHRA tickets, that will put it into perspective.
Back
Top