Recent content by ChrisN68

Carlisle is next week, I can bring if anyone wants. $195 each

I have a 741 Rear chunk w/2.93 gears. The bearings were all replaced new, spins freely, needs final setup. I ended up getting hold of a 742 and installed that instead, after having gone through this one and rebuilding. $200 I also have a brand new-in-box and still wrapped A-Body gas tank for...

2 PM's responded to - I am willing to ship the axle. PM me your zip if interested, and I'll find out the ship cost.

This was mistakenly advertised as an A-Body axle when I bought it, but it is really a B-body axle, so I cannot use it. It measures 55" from outside flange to outside flange. It had some surface pitting, but is otherwise solid, so it would be for a driver only. I throughly cleaned it inside...

This is out of a '69 Barracuda convertible, but I think it will fit 1967-69 too. It is in good shape for a driver, no chips or scratches on the surface or edges. It has the tint at the top. I don't need it, and I'd rather see someone make use of it than throw it away. I can't ship it though...

There isn't anything in there at all, other than the inner and outer housings, as others have stated. Here are some pics from a '69 with the fender out, if they help.

To correct the above, I meant adjust upward to make it leaner. :)

This is helpful, thank you. I won't get to call tech today, but it's good to know they are open on Saturdays. I'll run the data logger and see what's going on, and at least I'll have something to share with tech if they ask. As for the AFR, by default it was in the mid 13's on my unit. I have...

I had my EFI unit 30002 all set up on my basically stock 318 that was freshly rebuilt (cam is essentially stock, maybe a notch above; it's built to be a driver). The unit ran fine through the winter when I drove it a total of about 15 miles to and from the various local shops to get aligned...

Good suggestions. Even with the studs out, it is still 6" deep at the shallowest part, which is the exact height of the large box, and that's without anything to protect it. I'd hate to see them get bashed in an unprotected box.

Crackedback on these boards sells the relay setup, I installed one on mine. Nice easy setup, reasonable price and works great, and I'll bet if you ask him, he'd be able to tell you what kind of toggle you can use with the relays. I'd think you can use a relatively normal double throw switch...

Shipping is going to be high to Hawaii, unfortunately. They won't fit into a flat rate box, and the cheapest rate I found was through USPS for $132.60.

Various parts to a rearview mirror. The mirror itself is original, taken off a '69 Barracuda. It is in good shape, as shown in the pictures. The post is not original, and has some nicks in it, but overall in good shape. The base is new and unused, but does not have the ball for the post to...

Set of tail lights taken off a '69 Barracuda. Driver quality, they need some work, as can be seen in the pictures. One has cracked lens, the other is intact. One has a small ding on the chrome. Pictures show what you are getting. $45 plus shipping.