cli55er's latest activity
-
cli55er replied to the thread TKX vs T56.No I did not…. I don’t have torsion bars anymore though. I have RMS coil overs. -
cli55er replied to the thread TKX vs T56.No way in hell you’re getting it in there with the crossmember not cut.
-
-
-
-
cli55er replied to the thread TKX vs T56.I didn’t take it any kinda way…. But it might be pretty damn true that it only handles close to 600hp/trq. I made it too the 500 mile...
-
cli55er replied to the thread TKX vs T56.Yeah I would be the outlier…. Or those people didn’t have near as much HP/trq. I cruise at 70mph at 2200rpm. 3.73 rear.
-
cli55er replied to the thread TKX vs T56.No need… I have no torsion bars, but I did form a couple of ends to box in where I cut. Just realized you weren’t quoting me…. But...
-
cli55er replied to the thread TKX vs T56.70 dart….I have the TKX…. Was a pretty simple straight forward install. Floorboard didn’t need to be cut as much as the template asked...
-
cli55er replied to the thread 408 Stroker vs RV 440.I’m running those heads…further cnced to flow 325. 11:1 compression. 254/252@50 w/ .620 lift
-
cli55er replied to the thread 408 Stroker vs RV 440.60 foot over 2 seconds and 114mph That power all to one wheel at launch is a pita…especially on cooper cobras. Idc how well the track...
-
cli55er replied to the thread 408 Stroker vs RV 440.I have a set of 30 over Icon Forged pistons I could sell you for your 408 build. only used about 1000 miles if that. Long story as to...
