Coyote Jack's latest activity
-
Coyote Jack replied to the thread Exhaust manifold question.I'm just spit balling here. What if used the 6.2/6.4 manifolds and cut the flanges off and re-welded them at an angle that brought them... -
Coyote Jack replied to the thread Exhaust manifold question.That is the kind of information that is very valuable. You don't happen to still have those 6.1 manifolds you were trying? Jack
-
The SRT 6.1 Jeep manifold is it's own deal. They are NOT the same as car 6.2/6.4. Durango 5.7 manifolds do fit, they have a larger...
-
Coyote Jack replied to the thread Exhaust manifold question.After reading that thread it just might work with my setup. I can pick up a set of 6.2 or 6.4 manifolds, (same piece), for $200. Worth...
-
Coyote Jack replied to the thread Exhaust manifold question.Wow, over 60 views and nobody wants to chime in. Has nobody tried this before? I can't be the first. Jack
-
Coyote Jack replied to the thread Cat Pics.Say hello to Rocky and Trixie. They are brother and sister 9 month old Maine Coons. Rocky has had a rough go of it. He got FIP that used...
-
-
I am starting to look and see what I am going to need for exhaust and just about everything else. Keeping in mind that I will not have...
-
I use the ATI for my valiant.
-
Jack, my son is doing a 5.7 in an 88 short bed dodge truck now, new cam and lifters, eliminating the 4 cylinder shut down thing, a stand...
-
Quote: I haven't looked into the flexplate options yet There are a ton of options out there, as the 727/904 use is pretty common.
-
Coyote Jack replied to the thread It's time for a change.My little project took a step closer today. I found a core 5.7 out of a 2010 truck. The engine still runs and has no odd noises. The oil...
-
Correct. I was referencing what get's damaged from the material ground off the cam when things have gone bad for long enough. I could...
-
I would add that sometimes the tick is broken studs on the manifolds, not lifters. Also, if it is an Eagle motor, you can pull the VCT...
-
Coyote Jack replied to the thread It's time for a change.From what I have been reading it is the roller that goes on the lifter and that takes out the cam lobe causing the tick. Seeing as I...
-
Coyote Jack replied to the thread It's time for a change.I have been looking around and 5.7's with lifter ticks are very cheap. Seeing as I would be replacing all the internals is there any...
