indy top end 245cc like said earlier
indy intake 3/4 inch mill off to fit under hood
scat 4 inch crank
scat h beam rod
flat top forged piston
crane ,630 lift roller cam 272 and 282 dur
comp roller lifter
harland sharp 1,6 rocker
10,57 cr. ( not enough but street car )
it made 647 hp on 91...
like i said earlier they dont have a part number for those rockers but if you call them they are make you a set !!! thats what i did and ran for maybe the last 3 years !!!
i bought a pair few years ago , cnc version.
i made 647hp on a 410 at 10,52 cr and a crane .630 lift @ 272 int 282 ex dur
no leaks so far and engine run strong on the track and street !!!
some said they were leakers but not a drop for me
as rockers i use harland sharp 1.6 ratio and same...
I did it thuesday
darker than mine
Car was paint 10 years ago with dupont so...
the guy at napa also came and scan the door,rear fender and the trunck lid
it end up with a porshe code and its grayer that what I have on my car
my painter will try to mix the dupont and ppg to get close to mine
I dont know if it is water based paint that cause this problem but it pissibg me off
car was paint maybe 10 years ago and still nice but a i remove the fiber glass fender after being able to find steal one noe they are ready to be paint cant find the paint
they are suppose to come home and...
Need help
went to napa for buying paint for my car the paint code is fc7 plum crazy purple
they told me they cannot make anymore that paint , dupont no longer have the recepies to make it
does someone can help me out
dont tell me to go else where to buy it where i live there is not much...
Does it have a diference between the years in a body for hood hinges
reason i ask is on my car 1971 duster i have 1974 hinges the bolt hold are slotted
and the right one begin to be tired as i can say
and i found an other set of hinges in my garbage stuff laying around
but the bolt hold...