'Cuda_ragtop's latest activity
-
Finally I have an update! I was able to test fit the holders on a 67 and a 69. On the 69 the bulb holder has no interference (deeper... -
5.7 hemi 545rfe trans BMW power seats Classic Air Alterkation front 8.8 rear 373gears Stereo with Amplifier 4wheel disc brakes
-
“Are you not entertained” 440 Ported Edelbrock RPM 75cc heads Ross pistons, zero deck, 11.3:1 Eagle rods, bushed, 0.990 pins Main...
-
'Cuda_ragtop replied to the thread Spark plug wire routing for a 340 small block..Yup, that's how I do mine. Clean and away from heat.
-
-
'Cuda_ragtop reacted to mopardude318's post in the thread Spark plug wire routing for a 340 small block. with .How I do mine.
-
'Cuda_ragtop replied to the thread 6.1 Hemi 69 Barracuda Fastback Father Son Project.Thank you sir. Sometimes I impress myself. ;-)
-
'Cuda_ragtop reacted to DionR's post in the thread 6.1 Hemi 69 Barracuda Fastback Father Son Project with .Nicely done! I am impressed.
-
'Cuda_ragtop replied to the thread 6.1 Hemi 69 Barracuda Fastback Father Son Project.2017-18 Challenger console modified to fit Classic Auto Air Controls. Had considered upholstery for the new finish but concerned that...
-
-
'Cuda_ragtop replied to the thread 6.1 Hemi 69 Barracuda Fastback Father Son Project.It does. The one with the paddles will be staying though regardless... Don't think it will be an issue.
-
'Cuda_ragtop replied to the thread 6.1 Hemi 69 Barracuda Fastback Father Son Project.Ididit Tilt Steering column with incorporated EPAS Performance Electric Power Steering motor and PCS paddle shifters test fit together...
-
-
'Cuda_ragtop replied to the thread 6.1 Hemi 69 Barracuda Fastback Father Son Project.Usually, I will opt for machine screws but I had these handy. Considered finding and swapping but don't think it's really necessary...
-
'Cuda_ragtop reacted to jeffneal66's post in the thread 6.1 Hemi 69 Barracuda Fastback Father Son Project with .Great Idea! I'd like to suggest (you probably already took care of it) that you grind off the sharp points on the hook screws. We have...
-
'Cuda_ragtop replied to the thread Air cleaner.I switch between my factory 70 340 air cleaner and this one. I am certain this one flows more. But I like them both a lot so I change...
-
-
I wish the "weakest one" myth would go away. Saying any of the 8 3/4 centers is stronger is splittin hairs at best.
-
'Cuda_ragtop replied to the thread 6.1 Hemi 69 Barracuda Fastback Father Son Project.Well, so here the cluster is just held in with some tape. Was thinking about how to fasten the 2 together. Had several thoughts about...
-
