Recent content by cudadenny

I have a 69 Barracuda with a steel hood and with my M1 intake and the nitrous plate , the air filter touches the hood. I am looking for a hemi hood scoop and or a street type glass hood. I have see some pretty ugly 'copies' of the scoop but am looking for something 'correct' looking. VFN...

I did not take the gasket bore size into account , thank you. The reasons you pointed out make perfect sense. I looked closer at the engine block today and the area between 3+5 under the fire ring of the PT1009's looks to have been leaking (black). whereas everywhere else the fire ring...

The engine is supposed to be 9 to 1 compression and the pistons are at zero deck. I was planning on a 125 shot of nitrous when I come off the transbrake at 3500 rpms , and I have a dana 60 w 4.10 gears and 29x10 tires. I called Mopar tech and the guy was like " well those gaskets are...

I just picked up a new motor and pulled apart: it's a 400 w/steel crank w/ KB pistons and stage 5 iron heads, It had Felpro 1009 (.039") headgaskets , I have a set of MP 4286754 (.020") headgaskets in the package and am asking if the MP shim gaskets would be better for racing and nitrous ? or...

Talked with both Brewers and Passion , there are no straight cut gearsets for the A 833. and the 18 spline unit can handle approx 200-250 more HP than the 23 spline unit ( all else considered ) and the slick shift modified units are likely to pop out of gears during street driving so I was...

Yes , I am going to call some people tomarrow , I looked everywhere I can think of and every photo I see and every description or info page does not support the claim about those gears. I suppose it is possible , however unlikely that there would have been special gut for the factory super...

I have heard of that also , but the actual drive gears and countershaft gears are claimed to be straight cut and not helical cut ( like a rearend , curved ?) I have not ever found any info about that and checked on Brewer's website and all their gearsets look to be the helical type ( curved...

Is it true it would have straight cut gears ??

I am looking at buying a Hemi A 833 tranny , the guy claims it has straight cut gears in it , it is supposed to be a super stock a body trans , any of you guys ever hear of that ? what would a fair price for an 18 spline A body unit go for ? Thanks Fellas !!