Recent content by Da"DART"

Problem solved! Thanks to all the folks that replied offering advice and help. I decided to drop the pan and remove the valve body and clean it and go over all the adjustments stated in my shift kit instructions. With the valve body out of the transmission, I would also perform an air test on...

Today I tried to Tee off the transmission cooler return line and check for pressure, the result was zero. Then removed the supply line to the cooler at the radiator to check for flow and the result was also zero. I assume I have pump failure or improper engagement of the torque converter with...

Thanks AJ/FORMS for your help. I have an O.E valve body and I believe the shift kit is a B&M part no. 10226. I did do a hydraulic pressure test on the line pressure port and rear servo apply port. The result was Zero pressure at 1000 rpm and Zero with the throttle lever position moved...

The engine was rebuilt the transmission was modified. I guess life happens.

Hi All! Any help or advice would be greatly appreciated. The Original transmission was pulled from the car and modified around 1990 when I started the restoration. The car is a 1968 Dart G.T. When the transmission was out I installed a shift kit, deep tranny pan kit and Mopar 2200-2400 stall...

Thanks to all who replied. Looks like we got a winner! "starter relay cover".

Can anyone help identify this part and where it goes?