Recent content by Darr Hawthorne

1964-65 Plymouth Barracuda "fishbowl" rear window For Sale (NOT CAR) $600 Los Angeles, CA Good original rear window for a 1964-65 Plymouth Barracuda, has been in storage for six years. For SoCal pick-up or can bring it to Mopars at the Strip this weekend... prefer not shipping it! Make offer

A used '65 Barracuda rear window for sale, very good shape, no chips, no cracks ready to install. $800 O.B.O. - sorry but I don't have a photo right now. In the Los Angeles area just north of Dodgers Stadium for Pick-up or we'll build a wooden crate and ship it for approx $800 - depending on...

That log is part of a kit that includes regulator, fittings, pressure gauge and the log. I should have gotten the kit instead of one piece at a time.

This is the kit for connecting the regulator to the carb fuel log: Dual Action Fuel Log Kit – Aeromotive, Inc

There are three different sized Aeromotive "hats" - a smaller one comes installed on top of the Stealth Performance tanks, the slightly larger one on the Phantom in tank system and the dual Phantom with two 340 pumps. Mine is the smaller "hat", it came with the pump and fuel sender installed...

I checked with an NHRA Tech guy and we cannot mount a regulator on the firewall, but we are going to mount it directly onto the carb fuel log inline, thanks for the tip though. this is even cleaner, just need to order the correct AN fitting! Got more done Saturday, pulled the tank out to...

I posted this because we actually used the '70 A-body tank and with a minor fabrication mod made it work in a '69 Valiant!

We are running a Quicktime SFI bellhousing and McLeod dual disc clutch with a Passon Performance A833 4-speed, I don't think regulator placement is an issue. I really don't want to run the fuel line above the headers, for possible vapor lock problems, but I will check with a local tech guy.

I saw on BangShift.com Booth-Arons Racing Enterprises Assets Up For Auction – From The Mundane To The Awesome For Sale that there are some Mopar engine blocks for sale at auction. Mopar 360 #53020006, Mopar 360... Auctions Online | Proxibid Two Mopar engine blocks #53006... Auctions Online |...

We pulled out the engine to repaint under the hood.

Yes Aeromotive installs their Stealth/Phantom pump and sending unit into a new tank that is built by Tanks, Inc. With the cut and patch we made in the trunk floor we used a flexible line, like one used in NASCAR Late Models. We inserted a new rubber donut on the tank inlet to connect the...

I finished installing the Aeromotive Stealth #18344 in our A-body '69 Valiant last weekend. It fits fine, but Chrysler moved the filler inlet approximately 1.5 inches to the rear for 1970-76, so we cut a small square hole and made it work and easily welded in the small patch. Not a lot of...