Recent content by DDemon

No problem. Thanks

My shipping address is Darcy Nicholson 54139 Range Road 215 Fort Saskatchewan Alberta Canada T8L 3Y8

I’d take the Demon grill but shipping would kill me. Good luck!

I might be interested in the auto one if shipping isn’t more than the part. I tried to PM you but I’m getting an error message.

Looking for a set of 340 motor mount brackets. Darcy

What windows is the weatherstripping for?

Thanks for the heads up on the Cat stuff. I bought a new Powerbond balancer. I found out that there are two different lengths of balancer bolts which I think was my problem. 1.44” and 2.23” I’ll find out in the next couple of days.

The crank sprocket is against the shoulder.

So after closer inspection the balancer is butted up against the oil slinger and I still have this much room at the front (see pictures). Either I have the wrong balancer or something else is wrong. Are the 340 and 360 balancers different (besides the internal/ external balance)

Not 100% sure what the exact interference point. Since the end of the balancer went through the front cover opening into the seal I’m guessing it was hitting the edge of the seal (?). Seems hard to believe but there was nothing else there and whatever was there was solid. The end of the balancer...

Thanks YR.

Copy that. Probably going to invest in a few micrometers.

It seems that everyone including me thought it was a balancer problem. Not the case. Won’t make that mistake again.

Paperweight and doorstop were mentioned already.

So I removed the front cover today and BOOM! The balancer slid right on. The problem I was having was an interference problem with the front cover. I had calipered the crank snout and the ID of the balancer and everything looked good so that’s where my confusion came in. The balancer itself was...