Recent content by Devo44

The afr is tracking but its definately wrong as its smokes and backfires randomly through exhaust. Ive never heard of shorting the + - together. How does that help? Thanks!

Where would i find that? I havent seen that parameter in my handheld. Thanks!

Thanks. I have done that twice with no change

Yes e3s and there is already a return from the tbi to the reg. The system displays its at target afr but still running rich. IACs are 3-4. O2 sensor is 3" behind collector, welded bung. No exhaust leaks anywhere. Thanks for your input!

Cam is .578 230 dur 110 sep. Ran great at 13* with carb. I dont see how adding any more pressure than the 46 would help with a rich cond. Thanks for the input! I am about ready to go back carb..

Guy at fitech said if that was the case it would throw fault codes and there arent any

Its definatly +/- a bit. I have tried to adjust it with no change i will check fuel trim today and see what it is. I am truly at a loss here. Thanks for your time

I believe it was around 12.9

No power at wot. Sluggish

Yes its clocked correct i even removed and cleaned it. Dizzy is not controlled by efi unit.

Idle. It smokes and pops randomly through exhaust

I am! Feel like i just threw 1800$ in the shredder!

Yes it is. Says its running at 13.9

Ya all that has been done, reset and redone several times