Dwayne Fairchild's latest activity
-
DDwayne Fairchild posted the thread [SOLD] ‘66 273 2bbl & 904 Transmission in Mopar Mechanical Parts For Sale.Recently pulled from 66 Barracuda..273 V8 & 904 transmission. It starts and runs. It includes: starter, alternator, pulleys, motor...
-
-
DDwayne Fairchild posted the thread [FOR SALE] Used Mopar Viscous Clutch Fan in Mopar Mechanical Parts For Sale.This is a used Mopar Viscous Clutch Fan was purchased for my project and I’ve decided to go a different direction with this project...
-
-
DAre you SURE what you found is for an LA small block? Most of the clutches have slots. So unless the slots are not spaced equally, it...
-
D^^Agree. A bigger concern would be which water pump/tc cover you're using- '66s were designed to use the (pre '70) cast iron water pump...
-
DI have the MB clutch unit IIRC. Running it with a 68 pump. 3/4” from the original 340 A/C radiator.
-
DCheck here. Store - All Reproduction Parts | Tonys Parts
-
DI used the Hayden 2947 on my 69 with the same 360. It works great, but clearance is very tight to get the water pump bolts in. I had to...
-
DIf you have a "bit of a cam" in that 360, I highly recommend to NOT run a flexfan, on account of, I have not had any good experiences...
-
DDwayne Fairchild replied to the thread 360LA Clutch Fan.
-
-
DDwayne Fairchild replied to the thread 360LA Clutch Fan.I appreciate the suggestions. Thanks Dwayne
-
DDwayne Fairchild replied to the thread 360LA Clutch Fan.I’m running the newer water pump with the passenger inlet. I had the original radiator re-cored to handle the extra horsepower. The old...
-
DLooking to my ABody Friends for a little help, I’m rebuilding a 1976 360LA engine to put in my 66 Barracuda. I found an era correct...
