furrystump's latest activity
-
furrystump replied to the thread Advice needed on manifold repair.Rhino line both sides 1/8 thick and install. Sorry, that one is good for learning on, but run it? No. -
furrystump replied to the thread 340 X Head Value.I has been explained to me that at a full effort porting level. The x head is worth 10-12 cfm more than the J’s. This is due to the x’s...
-
furrystump replied to the thread Cylinder head discussion 340 with stock above deck pistons.I wish him well.
-
furrystump replied to the thread 340 X Head Value.Is that surface rust on the springs? I would be interested, but you should come to number you are comfortable with. I know that sounds...
-
furrystump replied to the thread Cylinder head discussion 340 with stock above deck pistons.You might be forgetting that it is open chamber and the lowest point of the chamber roof is probably more than he needs adding in the gasket
-
furrystump replied to the thread 360 push rod dilemma.Is there any witness marks on the valves or piston for that cylinder? If not, you might have had a sticky valve. If you are building it...
-
furrystump replied to the thread Cylinder head discussion 340 with stock above deck pistons.Like you said playing with launch rpm will help. Clutch Tamer would also make it much easier to repeat, but is almost cheating in the...
-
furrystump replied to the thread Cylinder head discussion 340 with stock above deck pistons.I would avoid the snubber and the extra leaves. I would work on getting a quality double adjustable rear shock when you can. Most cars...
-
furrystump replied to the thread Cylinder head discussion 340 with stock above deck pistons.Ok, 40 lbs off the nose is worth it alone. I have run the 65cc OOTB eddy RPM’s and run 12.3. My compression was about 9.75-10.0.with a...
-
furrystump replied to the thread Cylinder head discussion 340 with stock above deck pistons.Please don’t take my questions as a knock on your car. Not meant that way. I just think there is more in what you have.
-
furrystump replied to the thread Cylinder head discussion 340 with stock above deck pistons.If running the car is something you can see yourself doing for a long period of time, I would get the most aluminum head you can. That...
-
furrystump replied to the thread Cylinder head discussion 340 with stock above deck pistons.2.0 spinning or hooking or walking it out?
-
furrystump reacted to nfhDODGEnfh's post in the thread Cylinder head discussion 340 with stock above deck pistons with .2.0 60' 13.1 at 108mph im running micky street slicks 235/60r15 if I can increase horsepower and get a better 60' that would be even...
-
furrystump replied to the thread Cylinder head discussion 340 with stock above deck pistons.Here’s why I ask, say you start with 275 hp out of a stock 340. Then just adding the 100 shot you’re at 375 hp running 13.1. Not even...
-
furrystump replied to the thread Cylinder head discussion 340 with stock above deck pistons.What’s your best 60’?
