Recent content by gm442

I'm sorry I calculated the compression wrong ,11 to 1.the convertor is 3800 stall 9 inch.

I added more info

building a 408 stroker ,12 to 1 comp ,eq heads 2.02 valves light porting , dual plane high rise intake ,800 cfm carb ,904 trans 3500 stall convertor , 3.50 gear , hughes roller cam .560 int .562 ext 236 int 242 ext .050 107 centerline. cal trac setup 26inch tire how much hp and et. in a 1973...

THE avatar is the hurst hairy olds. the pan clears the headers ,now lets see if it clears k member. you have to drill a hole in the baffle for the dipstick. I have a 1973 dart swinger 408 stroker 500hp ,904,3500 stall ,3.50 gear 1970 442 conv 455 400 hp stick 3.42 gear

I putting a 408 stroker in my 73 dart swinger ,I thinking about using a milodon 30940 8 qt oil pan with hooker super comp headers. will it fit and what do I have to do to make it work ? has anyone used hughes camshaft her3624aln-10 ?

how much lift and spring pressure can stock magnum rockers take ?

I'm using a set of chrome direct connection valve covers ,will they clear roller rockers ?

11.50 will be my limit, i don't what to put a roll bar in the car.

Thanks, i have a really good machine shop so i know it will be balanced and setup right.

I asked scat after this posting, just to see what they say.

Why did scat make a cast crank assembly with high compression pistons ? I called scat and asked them ,they said this assembly will handle 600 hp and not to go over 7000 rpm. Higher rpms and bad install and bad machining breaks there cranks. Other people have used them with no problems for many...

changing cam to a hughes her3642aln-10 little less duration and lift.

i'm building 408 stoker motor using a 1999 5.9 motor. using a scat cast crank rotating assembly with flat top forged pistons with valve reliefs . should be around 12 to 1 comp . I have set of mild ported eq heads 2.02 intake valve heads hughes valves ,dual springs, roller rockers. motor is...

i'm using a ford 9 inch in my 73 dart. it's out of a 59 full size ford same size as a stang, same size as a body dodge.

what to change to manual brakes,front disc ,rear drum. what to go to 2 bolt master. what master and push rod should i use?