Recent content by Handy Andy

The m1 with a 1in 4 hole supersucker.The stroker provides excellent torque and the m1 will give good midrange and top end power.

With a full port 894x headed stroker with a 750 hp Holley,step headers,an M1 single plane and a xe275hl cam with a 1.6 roller rocker 9.5 comp.ratio etc. you would be in the 440 hp/490 ft/lb range like the one i built.In a light 3150 lb A body with the right gear like a 3.91 4.10 ratio and a good...

I am using the comp xe275hl cam in my 340/416 stroker and just love this cam.fantastic torque and midrange power.i don't spin it past 6000 rpm's because it is a stroker,and is a street car,it would work great also in a 340 street car up to 6000 rpm's.

Nice looking Barracuda Scott.Look's very clean.

I just purchased a new SFI 6.1 approved Quick time bellhousing.Has any member's used this piece.How is the fit,does it also require centricity to crank with offset dowel pin's or will straight pin's work o.k Going in my 340/416 f/b Barracuda.

That cam would be good to 6000 rpm's.I run a 4150 HP 750 big's prepped carb with my 416/340 stroker,it run's great.

I also have a 340/416 combo with a balanced Scat kit.I am running the 894X head's with S/S valves full port and polish.port matched M1 single plane intake with a supersucker spacer,the XE275HL cam and a Big's prepped HP 750 4150 CARB.This setup has awsome torque,I figure it should make about 445...

Welcome to the site Glen

Looking to install a 6 or 8 point roll bar in my 67 f/b Barracuda.Which would be the best recommended manufacturer,and any pic's would be great!

Nice trailer Scott.Can't wait to see it up close.What are you going to do with the old one!

Right on Scott.Good work!.Car sound's real strong and look's good to.Hoping to get my stroker Barracuda in the mid 11's this coming year.

They would be at least 72cc. I have a pair on my 85 d150 pickup truck.It has a 318 in it,i had the machine shop cut them down 40 thou on the bottom and 25 thou on the intake side and used the M.P thin head gasket.Every thing went together perfect.Work's great.

I just got a new one for my 67 s Barracuda this week from Herb's part's. It's flat,he has three more if you need one.

Arrived at Moparfest Sunday morning,was a great show with desent weather,we found the FABO member parking and met some member's,had a great day.Thank's for the kind word's Bill,love the dart.You as well Scott,love your dart as well.

I'm going and taking my 85 Royal s.e d 150 pick-up.Fully restored.