harrisonm's latest activity
-
harrisonm replied to the thread Bondo/fiberglass as the right choice.Yes and No. Would I ever say a patch like that has been "Done Properly?" No! But keep in mind that not everybody has a welder. Sometimes... -
harrisonm replied to the thread Raised white letters or blackwall.White letters. And you can always flip them around.
-
-
Flip one around white letter and you can see both ways.
-
harrisonm replied to the thread EFI to replace Edelbrock carb.There is ABSOUTELY NOTHING wrong with Eddy carbs. I am on my second one, and it works flawlessly. Whoever said that knows nothing about...
-
and they are a bunch of idiots.. don't take any advice from those clowns.. an edelbrock carb is perfect for what you say you want to...
-
harrisonm replied to the thread NOT A PAINTER.I looked up CRE primer, and all I found was CRE epoxy primer. Do they make more than epoxy primer? I was wondering if you used epoxy...
-
I've repaired 8 tracks many a time. Quite easy really
-
That is a gasket which goes on the quarter glass mecanism. The round circle is markings from the bolt w/washer. There are two on each...
-
harrisonm replied to the thread Added Current Photos When my Dart was Brand New.Super cool. A 273 with a 3.91 must be fun on the highway.
-
Thanks for that. I always hope what I post helps others down the road. God knows, I get plenty of help here on FABO. :)
-
harrisonm replied to the thread NOT A PAINTER.I don't dislike self-etching primer; I have just never used it. I have always had really good luck with using a DTM epoxy primer on the...
-
harrisonm replied to the thread funny pictures.About 45 years ago, when I was flying all over the world in C-130s, I actually went to a Bumfuck Africa type place. It was a real ****...
-
harrisonm replied to the thread "Liquid Sandpaper".This has been an excellent and informative thread. Thanks to everyone who posted. I usually use small pieces of adhesive back dry...
