Recent content by Hazard County 29

Well I got most of the backside stripped of paint. Found a lot more Bondo repairs. Gonna head out to the store today so I can find some sheet metal to trim and weld in.

Well everyone I've been working on the cosmetic side of things lately. I got started by pulling off some body panels and ripping off the 6 layers of paint and Bondo off the car. The current plan is to have the car stripped and primed by the end of the month.

I had to do some grinding and massaging with the ole Tonya Harding. I wouldn't recommend using the gaskets that come with it. I'm using felpro replacement gaskets that I used for the gasket matching for the porting I did. I did a video on what I did back when I installed them about a year ago...

I'm gonna start being more active on the forums over the next couple of weeks. This winter I plan on getting a very large chunk of body work knocked out with a deadline of having the car put back together and driving by April 15th when they Certify roll cages. Hopefully I'll have the time to get...

Here's some photos of the interior, the engine bay, the most recent times slips at the local dragstrip, Pueblo Motorsports Park in Colorado.

mild 360 magnum stock bottom end Mild ebay regrind cam Specs: Advertised Duration In. 276 Ex. 276 Duration @ .050 In. .224 Ex. .224 Valve Lift 1.6 In. .512 Ex. .512 LSA 112 Holley Sniper EFI Self-Tuning Fuel Injection Systems 550-511K Holley Sniper EFI HyperSpark Distributors 565-304...

Be prepared for a lengthy update with a list of parts used on my build. It's been definitely difficult keeping up with all the platforms I use in association with the car. I've had more time to collect a small list of parts and pictures after taking a little time off from the YouTube channel...

https://youtube.com/channel/UC_9C8kt4hnsLEMrafwYRNjA So I have forgotten how bad I am with posting updates and getting back to forums with them. I did start up a YouTube channel with a majority of what I had done after assembling the motor. But she finally made 2 passes without an issue at the...

I recently wired up a Terminator X in a friends 83 foxbody. If you don't care if it looks pretty, then it works. But if you care how it looks then it's up to you to keep it out of site.

I'm running the sniper 4150. I'm running all 12v switched off of a fused power distribution block that has a 100A relay I ordered from Amazon to help power up the sniper EFI when I turn on the master power switch then a secondary I can kill if I have a malfunction on the drag strip. I'll see if...

Update the company will be doing a 1 for 1 swap to get me the right transmission. I just have to bite the bullet on getting it to them.

Well shipping was free but I paid almost 2k for the full transmission package

I received it yesterday

I'm pretty sure they gave me the small block