Recent content by Hemi_Duster

It's top secret! :glasses7:

Welcome from NW Ohio!

I went with the 545RFE. Wasn't $350 ( good find BTW ) but it was 26K miles and was able to get starter, flex plate, TC for about $650. If I had to do this again I would get it from a jeep along with the shifter and ECU. This way I could have an autostick setup.

Must be something in the Canadian water! :o

Thats a good suggestion.

Right now its getting prepped to make its way to media blasting then it's going to get a few subtle body mods. Orange candy paint, 20's on the rear, 18's in front and a 5.7 Hemi. Hope to have motor in car before snow flies.

not me! my butt hole was puckering just watching!

People these days are a pain in the rear. If you buy a used car part then you take the chance of it being defective! From this day forward I will always sell things with a bill of sale stating that its ASIS and the risk lies within the buyers hands! whatever happen to the days when people...

I will most likely narrow my 8-1/4 myself. Luckelly for me I work at a machine shop! I believe I will just order premade axles but once I get it appart the machinest can see if we have tools to re-spline the axles. Look forward to being at that point of this project.

I will need to measure it. My shop is 60 miles away so I only get to play on the weekends. I will be sure to measure it and let you know.

Got my Hotwire harness today!!! Actually got to meet them at the nats and see the harnesses so the surprise was kinda ruined but it's still cooler to have it in my hands! Look forward to seeing how it all plugs in and fits. Was very surprised to find out that it came with the relays and a nice...

Looks good. I just need to get some measurments and get busy!

I assumed that yours were more geared towards the GM style. I suppose I will measure mine and see what size the hole needs to be. Thanks

Ok that is good info. I assumed the first but wasn't sure about 2nd. Third I figure that's where companies like strange come in. Thanks again.

I have a question about axles. If you are going to narrow the housing do you need to find an axle and narrow to that width or can the axles come in or be modified to any length? Does that question make sense?