Recent content by j340lm

I spoke with DantesParts and they are roughly $10 cheaper in total using UPS Ground. Legendary was slightly more but still less than Year One. Thanks.

I will look at Legendary. Year One with their ridiculous (at least to me) of $65.77 for S&H on a $69.93 item takes them out of the search. It was verified by their sales staff.

I'm looking to replace the trunk mat on my 1970 Dodge Dart Swinger 340. I've looked at Year One and Classic to start and both show Grey plaid for the year and color. The original one is yellowed and somewhat faded, had the Dart 50+ years but never took any trunk pictures so I have no...

.If you're still headed to Mansfield next week how do we make the transaction for the wheels? I can give a phone number if needed.

What is the rim width on the ralley wheels and do your centers match what I have now in that picture? The price for the 14x5.5 wheels is $75 and for the two ralleys with centers and rings would be how much?

14" x 5 1/2" small bolt oem steel wheels? What would you want for one. Also these rallys are what is on the car now, I had to media blast them, paint and locate centers and trim rings. If you have 14" SB rallys for two what is the asking price? I'm roughly an hour and a half north of Mansfield.

Where can I locate at least 1 OEM 14" x 5 1/2" SB steel wheel for a 1970 Dodge Dart. Thought I had found two but looked and they were the 4 1/2 pattern. Also in the market for two 14" Rally wheels SB pattern. Any suggestions would be appreciated Thanks.

The only difference I see is in the width. Either 8.8 or 9.7" wide, the length is correct. I'll have to check wihich size is under there now. Price is more affordable than Accurate Exhaust so that helps. Thanks. That is really clean and looks good. Thanks for the part numbers.

Length 18", inlet / outlet both 2 !/4" looks Accurate is the choice. Price is about $80 more than the Maremonts in the late 70's. Thanks.

I've had Maremont mufflers on it since the late 70's when I pulled the Hookers off and went back to full exhaust. In fact its still muffler clamps on all the connections (still have boxes of them) thats how old it is. The driver side one needs attention. I can try JB Weld paste but that won't...

From a few months back. I contacted the real B & R Wrecking and confirmed they have a yard in Graham WA but not that one. Also they had no 1964 Didge Dart in the company inventory. Also they will take credit cards and e-checks, PayPal but no Apple Pay. I was leary when the ad responded back...

It stalls out when I spray the secondary shaft and the rpm drops when I spray thethrottle shaft area.

There is play in the secondary shaft, more than the throttle shaft rod. Today I sprayed some carb cleaner at the seconday shaft and the motor stalled out. I repeated it on the throttle shaft area and the motor rpm reduced and would have also stalled had I kept spraying. This sound like I...

Age wise its close to 20+ years old. Back in 20146 I used Sunoco 94 mixed with Cam II and stored it w/o starting it for about 4 months. That was the first time I had the carb rebuilt by a corner garage guy who claimed he knew how to rebuild them. I knew ethenol damaged the rubber but he only...

It was just a brief slight trickle I did. Not like some of the guys on tv who pour gas in while cranking it. The car did eventually start with some starting fluid. So it will run.