Jimbo_74_Duster's latest activity
-
JJimbo_74_Duster replied to the thread New Waterpump Hardware slightly Different_Plymouth Duster 360.Thanks guys! I bought permatex high tack gasket maker and also will blow those holes out with an air compressor before hand...
-
JJimbo_74_Duster reacted to str12-340's post in the thread New Waterpump Hardware slightly Different_Plymouth Duster 360 with .Use Thread Sealant instead of RTV. It's made for wet holes and never completely hardens to keep it sealed.,, White stuff in a tube or...
-
JJimbo_74_Duster reacted to AJ/FormS's post in the thread New Waterpump Hardware slightly Different_Plymouth Duster 360 with .Honestly, I don't know. I've have had no luck sticking RTV to a moist surface. But I don't use RTV for this job. I have an ancient...
-
JJimbo_74_Duster replied to the thread New Waterpump Hardware slightly Different_Plymouth Duster 360.Hey I have a second question. Obviously the coolant has been drained but there is still a little coolant in the backs of the holes that...
-
JJimbo_74_Duster replied to the thread New Waterpump Hardware slightly Different_Plymouth Duster 360.Thank you so much! I wonder maybe the previous owner didn't have power steering and then when he put on the power steering pump he just...
-
JJimbo_74_Duster reacted to AJ/FormS's post in the thread New Waterpump Hardware slightly Different_Plymouth Duster 360 with .The P/S bracket requires the 1/4 inch longer bolts. The other side gets the shorter ones. When no P/S pump is on the engine, all 4...
-
JJimbo_74_Duster replied to the thread New Waterpump Hardware slightly Different_Plymouth Duster 360.I do
-
JJimbo_74_Duster replied to the thread New Waterpump Hardware slightly Different_Plymouth Duster 360.Yeah I probly can. I just figured I'd try to use the new ones. I'm gonna stick a chopstick into the holes to see how deep they are and...
-
JJimbo_74_Duster posted the thread New Waterpump Hardware slightly Different_Plymouth Duster 360 in Heating / Cooling / AC.Hey All. I'm replacing the water pump in my Plymouth Duster 360 and I ordered new hardware from Classic Industries. I attached a link...
-
-
JJimbo_74_Duster replied to the thread Removing Fan on 360.Thanks for all the input
