Recent content by jimfish

So, this thread may sit for a while. I hope I find someone that can/wants to contribute. I will update in the late spring. I bought a 92 Dakota LE with a 5.2 and 140K. It seems to be solid, though I may have to replace the Idle Air Control Motor (IAC) (some weirdness with the Idle at times) Any...

Thanks Rockerdude! (cool name BTW) I actually did not find any other info on this site in regard to this type of swap?? I can't believe no one else has done this or asked about it. I do suck at searches but something should have turned up. Well.. I think I will go ahead with this 96 5.2. I...

Hey guys, Sorry for the repost to start with. (I can't be the only one) I came on here to see if any one can direct me. I have only the time to post this and get back to work. I have my hook into a 96 5.2 from a guy that says it will fit into my 68 Formula S. Without getting into more details...

Me three! Remember.. The crank distributes the oil to the cam and it in turn sends it to the heads. I turn the drill on and then, with the distributor disconnected, turn the motor over a bit. I found a broken cam once this way. (no oil to the rockers)

This is what I did. Works like a charm.

I can confirm this is the exact one that is in my 68 Form. S even has same wood grain. This is only other match that I have ever seen BTW. wish I had the need or a spare 150. (: this is a great price!

Dono if you figured thia out on your own or not nut this might help you. http://www.forabodiesonly.com/mopar/showthread.php?t=101030&highlight=SSBC+Disc+Brake+Conversion+Kit Cheers

I am working on a rear end swap now. I have 355 posi. 489 case.. eerr chunk? and stock axles (they look thicker than yours) I just had bearings pressed onto my axles (cone) and popped the seals in myself. Am at the painting stage right now. How did... is your project? I hope you got it resolved.

Remember, no K-member is perfectly straight. I used a shim kit and measurements found on internets and straightened the engine up in the compartment. You would not believe the effect it had on consecutive alignment and how things bolted up. It all fell together when everything use to fit not...

I don't know what it's made of. But there's a guy on ebay selling Steel braided hose with fitting for the tranny cooler aplication. Ask him what it's made of. Mean time here are a couple sights I have found. And a clip from a former blog. Here is the blog " :salut: " (Hi Norm...