Recent content by jmaloy

ray barton race ing. spec the cam to my truck (tire size, gear ratio, weight, ing size, ing built by local builder no head work other than valve job was done that I know of (only one head man in the area he was sick could not get to them at the time of build) I chose the triy headers for the trq...

ok so are there any head shops in the north Florida ,south Alabama ,south George areas

hello all numbers are at crank mopar 2.14 and 1.88 duel comp springs 10 deg retainers and lock cran gold race roller rockers 3/8 pushrods edelbrock performer intake and 750 carb kb hypereutectic piston with .170 quench the engine has been setting for ten years was planning to go into check...

Hello i'm running doug Thorley triy headers custom ground comp cams solid flat tappet gross lift .507 duration at .050 242 lob lift .3380 lob sep. 106 set at 102 deg centerline

Hello all new here I have a 440+30 dyno at 432 peak hp @5500 500trq @3200 452 heads 3 angle valve gob gasket matched no other port work would a port job be a benefit