hi, i spent all night retracing my work. I dis put it together right the first time. but line pressure leaves the ps pump fine and does not enter the hydroboost…. so i swapped the lines and fluis entesrs now, got steering assiste but no brake assist.
iam going to swap them again now and see...
its a kit for my car i got on ebay. i did contact the seller.
i did find the line diagrams online and the hipress inlet on the hydro is in the reservoir side…. but no fluid moves that way…
Hello guys, i just installed a hydroboost on my 71 demon. the line from the PS pump goes in on the reservoir side, on the other side is the HP line to the steering box and the small return to the PS pump.
Ran the engine and the steering fluid did not no down and the fluid got super hot...
Hi, i left all the qa1 stuff on, we has some other custom brakets made and those were the ones we removed.
i think you are correct about the toe, if its way to off these cars do this
ok guys, so we removed the unnecessary mods, and it looks like it’s working!! ill take it for alignment tomorro and take it for a ride and let you know. thank you all so much for the help and ideas
the thing is that my tie rods are made eith Hiem joint, so I can put them in the front or back of the drag link ( drag link has no cone any more on the ends)