junkyardhero's latest activity
-
Jjunkyardhero replied to the thread Is the spool mount k-member worth modifying/reinforcing and what should I change on the suspension brakes?.i'll add to this not all 15" rims fit either! you'll definitely need to go to 15 for the bigger brakes though.
-
Jjunkyardhero reacted to tonysrt's post in the thread Is the spool mount k-member worth modifying/reinforcing and what should I change on the suspension brakes? with .You may have to go to 15" wheels to use the 11 3/4 rotors.
-
JOk guys just to keep you updated whats going on: As when I pulled the bottom end of the 318 apart i found that one of the pistons had a...
-
Jjunkyardhero reacted to Cal Tonsley's post in the thread 440 Jensen Interceptor Exhaust Crossover / Balance Pipe with .Hi, we have a 1970 Jensen Interceptor in our shop that needs some repairs and mods. These cars run a 440RB motor and 727 Trans package...
-
JHuh?
-
Jjunkyardhero replied to the thread I hate BMW’s.oh... have a seat fellas and let me tell you about Aprilia... torx and allen heads in stainless or aluminum, all different sizes and...
-
Jjunkyardhero reacted to harrisonm's post in the thread Machinist will not build engine unless roller cam is used! with .My friend Mark is having the 327 for his 67 Camaro completely rebuilt by a local reputable performance-oriented machine shop. We took...
-
Jjunkyardhero reacted to 72bluNblu's post in the thread Is the spool mount k-member worth modifying/reinforcing and what should I change on the suspension brakes? with .The K frame is absolutely worth reinforcing. I fully seam weld mine, as well as boxing in the steering box mount and adding reinforcing...
-
Jjunkyardhero replied to the thread Is the spool mount k-member worth modifying/reinforcing and what should I change on the suspension brakes?.i like to box the steering mount, add a skid plate and shore up some of the perimeter welding. i've had good luck with prothane poly...
-
Jjunkyardhero replied to the thread Cheap 318 performance mods..+1 "no fat chicks" bumper sticker
-
J1969 Satellite 318 with Edelbrock 1406 4bbl, 727 and 2.94 gears, and single factory exhaust > 20 mpg, Yes Sir... The light weight...
-
Jjunkyardhero replied to the thread How far in the hole 318 pistons.HAW! good luck with that. these dudes will argue about **** they think they remembered from 1976, and even then they were wrong.
-
JHey, I'm pretty satisfied with my stock teen 2 barrel with some lighter advance springs. I have a perfect LD4B and a 650 AVS2 to go on...
-
Jjunkyardhero replied to the thread Cheap 318 performance mods..very early dakota on the pass side. and then pretty much whatever fits on the driver's side. i think mid 90's dak have the magic on those.
-
JWhere are you in California? I have a few places I can send you to. Magnums have good ring seal well in to the 120,000 mile range...
