Kendog 170's latest activity
-
In an earlier post I read that with the 4 pin ecu (green wire not used) you run a single ballast. Well, I have a dual field alt. Dual... -
-
Sweet!
-
The wheel covers are the same Bolt-on style as the fastback so I had a small inventory of them along with the ones from the car. Most of...
-
Kendog 170 reacted to 393foureyedfox's post in the thread [FOR SALE] 5.9 Magnum motor and retrofit wiring harness EFI setup, ready to drop in and run with .Located near Salem, Indiana, about 30 miles NW of Louisville, KY. The link below states all the details, any other questions, please...
-
Kendog 170 reacted to AJ/FormS's post in the thread A body with an A833 and a Gear Vendor installed with .Ask me anything about installing or running the GVod. I installed mine in 2004. I would NOT say that is the greatest thing since sliced...
-
Kendog 170 reacted to Fast340cuda's post in the thread A body with an A833 and a Gear Vendor installed with .I prefer the look of the round shift handle and ball in an a body. No cuts at all in the tunnel. Just took a few good sized clearance...
-
Kendog 170 reacted to 4spdragtop's post in the thread 67/68 barracuda rear window pull, reseal, replace question please with .Congrats! That's a beauty!
-
Kendog 170 reacted to 5Starrob's post in the thread 67/68 barracuda rear window pull, reseal, replace question please with .All fixed! Two hours at Speedy. Pull trim easy. Pulled glass. Cleaned up Everything. Found a pin hole in the area the driver new...
-
sir, this is misleading. i came for some beefcake and all i got was cool story about a cool car. anyway, moar pics!
-
So I am still waiting on my thermostat water housing. I assume that not having a thermostat relief for the thermostat to sit in the...
-
I see frequently someone mention that a motor smokes on startup, and everyone jumps right to bad rings or valve stem seals. Neither may...
-
i have for sale real nice 83/4- a body housing and stock axles 4" bc $475 replace that old 71/4 with this like new 83/4 pick up...
-
Kendog 170 reacted to 1966Post's post in the thread [FOR SALE] 340 2.02 heads & Torker II intake with .A matching pair of 915 casting 2.02 340 heads and an Edelbrock Torker ll intake. All have stock ports (no guru's hacked on them). Heads...
-
Kendog 170 replied to the thread 1969 Race Dart w/ 426 Hemi- garaged for 45+ years.It will take year to save the gas money up. :lol:
-
Polished :) have I would say 20-30k miles on it and several years. Assault racing intake (Chinese). This was my first one and have...
