Recent content by kyle's 73 sport

sorry I haven't replied in a while I've been really busy and now my car is in a shop getting some body work done. I changed that 273 rocker out with a stamped rocker for a 318 and it runs a lot better but it still has a slight tick when it's running on that cylinder. Where can I get a set of...

location anyone?????

I looked all over and am having trouble finding it. The engine is a 413 that came out of a 1968 30' motor-home. I found a production number that was 10/16/70. -I thought they stopped making the 413's in 1963?

I already went to the parts store and ordered the rocker arm and pushrod. Thanks though. So I should flip the rocker shaft so the oil hole his facing the head? I'm going to check the other side to see if it's like that too.

Could you explain this a little more to me i'm confused?

I went down to the parts store and ordered a new rocker arm and correct pushrod for that side, they will be here in the morning.

the number inside the head is: 4027168. what heads do I have?

Um, yah. I deffinately wasn't expecting to see that when I took the valve cover off. the reason it's not lined up with the valve is because I was showing how much it could wiggle back and forth because of how loose it is.

Ok, the intake is the performer. The heads have: 4027168 on the inside and on the other side of the pedistool it has 555 on it. My stall converter is actually a 2500 rpm stall I went and looked up the part # on the TCI website. When I took the valve cover off ov the passenger side head I...

what is the rpm range of this cam?

it's in a '68 dart gt. I just bought it, and i'm new to mopars. It has a 318 w/ edelbrock performer plus intake, edelbrock 600 cfm vac. secondaries, accel ingition w/ pertronics, hooker headers, and I don't know what it has for internals but it sounds like it has a small cam but I think one of...

What should the gap be?

My '68 dart w/318 has pertronix conversion on it and an accel coil, and accel 8.8 mm wires. It seems like when I put a load on the engine (like when i'm accelerating hard) it seems like it drops 1 if not 2 cylinders at about 3500 RPM and I noticed that my tach needle bounces slightly at an idle...

Thanks............

Does anyone have or know where I can get a factory sunroof panel for my car mine is pretty rusted from the vinal top, and I want to find one that is in better condition than the one I have it needs a lot of work and i'm in the process of having the paint and body work and paint done and i'm not...