Recent content by Lava Man68

So when does the cam operate best at? ANd on the Springs that are recommended to run with the cam will they work with the 360 heads?

Its all good

Cool Thanks for the in put I just recently got a 360 and I had that cam in mind. Sounds like a good way to go.

Has anyone ran the Xe284h cam in a 360 or a cam close to that? its a .507/.510 240/246

Ok so I should go with the solid roller before the flat tappet. Im still on the planning on the build im trying to find what would work ad what I can do with.

Ok thanks I got hold a 318 roller block and I havent a roller cam that I like yet but I found a solid roller I like and a Hyd flat tappet that I like and I didnt know if it would change the lift and/or the duration.

What would happen or change if a Hyd roller lifter was put on a solid roller or a Hyd flat tappet cam?

Here ya go. http://www.speedwaymotors.com/1967-1972-Mopar-A-Body-Engine-Swap-Kit,1179.html#tabcontent

Ive used a kit from speedway motors and it was about $90 shipping and all, I havent had any problems with them and they have been in my car little over a year.

I installed a 318, I believe one of the ears on a 318 block is a little bit different than 340/360 but its not enough difference to have any problems. Atleast in my case i havnt any problems with them.

I have this Kit in my car now and i havent had any problems. http://www.speedwaymotors.com/1967-1972-Mopar-A-Body-Engine-Swap-Kit,1179.html

Well I seen him in class today as we was taking attendance and it was his turn to come up to sign the paper and some of my friends yelled "hemi" and then i yelled "440" and turned around and flipped us all off. Which other then that I didnt really talked to him, I didnt go out of my way to talk...

Thanks yall I didnt think I was crazy, Im only 19 and I grew up in a mopar family so i thought I knew better, I go to an automotive school so most kids have some car thats really fast thats either rare or to fast to drive on the street ramenth- Im going to have to remember that, I asked...

I was told that a 426 hemi head will directly interchange to a 440 block and run. I know that they made a conversion kit if I remember correctly. Me and this other been going around about it and Im just trying to find out whats true.

I used a set from speedway motors for about $90 that's with shipping, my car uses the biscut style mounts