Recent content by Lugnutz

Hey guys, I am looking for a little bit of help from those that have been down this road before. I have a 1970 Dart Swinger that I want to install the engine hood scoops and a Go-Wing on. I see them listed on E-bay and several Mopar specialty shops carry them. I have read a few threads...

I am looking for a Go-wing and the two engine hood scoops for a Dart Swinger. Anybody have one laying around or can recommend a place that sells them? Not looking for NOS or factory part numbered, just needs to fit the factory mounting holes.

I am looking for a set of Trim Rings for 14" Rally Wheels. Driver quality is fine as long as they are not too badly curbed up. Zip code 98444

PM on the way.

Hey guys, I never said anything about a tunnel ram or anything poking through the hood. As most know, the D series or STR-12 Edelbrock's are a low rise manifold and fit under the hood. I am just trying to build a fun little cruiser for the girlfriend with a hint of cam at idle. I'm not looking...

I had a chance to look at the cams that were mentioned and I did a bunch of searching for what the power brakes boosters needed for vacuum to operate correctly. Everything I found showed 16 to 20 inches of vacuum was needed to operate the brake booster correctly and camshaft durations beyond...

Thanks for the suggestions so far. I will look at the profiles when I get home tonight. Also, somebody mentioned a converter with the right stall and the heads with the standard pistons. Keep in mind it's a 4 gear car and the 302 heads are the swirl port closed chambers. I will be working...

Not sure what is meant by more information on the package as a whole or more particulars. I thought I laid out everything that worked with it as a combination other than I will probably use 340 exhaust manifolds, 2.5” dual exhaust with a more quiet than loud muffler and tail pipes. Again...

I am looking for a little help from the cam guru’s here. When it comes to aftermarket camshafts, cam lobe over lap and or centerline how much is too much to where it creates issues for power brakes? I would rather not plumb in vacuum canisters or vacuum pumps. I am planning a 318 engine...

I am looking for a little help on choosing leaf springs. I have a spring shop here in town but I have to tell them what I want. I would like to hear from other A-body owners that have been down this path. I am working with a 1970 Dart / 6, and the rear leaf springs are dead. The prior owner...

PM sent.

I saw that one on craigslist. Gonna keep looking for a driver.

PM sent.

When you get a chance, can you post some pictures?

Hey gang, Just thought I would throw up an ad to see if by chance somebody has a 70/71 Dart lying around. Last year I took the girlfriend to a mopar show and she fell in Love with the Vitamin C Orange color (Orange is her favorite color) on a 70 Roadrunner. Since then we have talked about...