Recent content by MapleAvenue

Those decals are really nice do you sell them? Please contact me at (mapleavenue@optonline.net) Thank you, Joe

I've been told that the Melling high volume oil pumps were resulting in very high oil pressure numbers. You might want to check this out. Hope this helps.

Hi I have an original 1972 Demon. My shifter came with a WHITE BALL. Hope this helps.

How big are the exhaust ports on your heads? You might have to run the bigger tube 1 7/8" style headers. The 1 5/8" step headers could restrict the larger exahaust ports on some heads like the Indy modified Edelbrocks. Good luck

Hi Fellas. I'm running a 340 stroker with an 833 in my 72 Demon. I think that I'm experiencing not enough clutch release. I'm using a Lakewood Scatter shield with a McCleod dual disc clutch and Borg n Beck 3 finger long style pressure plate. I've already corrected the Z-Bar bracket to align the...

Where do you live in the Northeast? This transmission builder is on Long Island. If you're interested I can give3 you additional info.

Hi, I live on Long Island New York, U.S.A. I've been dealing with a very well respected and successful engine builder for years by the name of Jack Merkel. He was a very successful racer in the 60's and has a lot of experience with Mopars. His son Scott and him run a very good Race Engine shop...

Try Rock Auto. Vey reasonable. I got all Moog parts for my 72 Demon from them. Good luck, Joe

Hello, there is a guy here on Long Island N.Y. His name is Tom Derych. He has been a Transmission builder for over 35 years, he's fantastic with Torqueflites and 833's. He's a MOPAR guy, he owns a 70' 472ci. blown Hemi Charger and an original 70 440+6 GTX. I hope that you check him out, Joe Arceri

Could you send me some info on these garage decals such as colors, demensions and pricing, thanks, Joe

Hi, I like the For A Bodies Only large decal. I'm not very good at navigating through this site at times. You psoted that these decals are available from "2-Darts". Can you tell how to contact them and the price of the decal. Good luck with the garage, and thanks Joe Arceri, E-mail...

Hi, I have a 340 stroker in my 72 4-speed Demon. I tried to use the TTI 1 7/8" Heaaders because I'm running the INDY large port Heads. I ended up returning the TTI'S because they had a lot of clearance problems around the torsion bars. I went with a custom made stainless step header (1 3/4'-1...

That is a project well done. What Engine/ Tranny combination are you running? I have a 72 Demon that I just completed. They're beautiful A-Bodies.

Hello, I have heard from some very knowlegeable Mopar people that the Melling pumps are the problem. Check with Herb McCandless. He was the one that brought this to my attention. Good Luck.

Hello, Wix makes a filter that's about 1/2" shorter than their 51068 filter. The part # is 51521. I'm using this one on my Demon due to my custom headers being very close to the filter. I hope this helps you, Joe Arceri.