Recent content by Matt K.

Im seeing ~$20-25, i'm assuming you are asking about the rusty flywheel?

Looking for a 122 tooth Flywheel that will fit a 1975 Slant six engine. Willing to picking up or pay for shipping.

I have two flywheels I had bought under the impression that they were slant six flywheels. They are not for slant sixes, they have the 318 crankshaft bolt pattern. The cleaner flywheel is a 10.5" 122 tooth flywheel while the other is a 11.5" flywheel (I haven't counted the teeth). Looking for...

So, I have already have a clutch master cylinder mounted in the car, I have a brake pedal setup that (with the master cylinder) pushes the slave cylinder the distance that it needs to move the fork to engage/disengage the clutch. I am only asking if someone has a picture that shows the clutch...

Hello everyone, I am doing an a833 swap into my 904 equipped slant six 1975 dart. Because I am dead broke and cannot afford all the clutch linkage parts, I have opted to use a Datsun hydraulic slave cylinder and a heavily used Tilton brake master cylinder. I am currently designing a mount for...

I checked for voltage and found that the middle firewall connector was not connected correctly. I fiddled around with it and got my continuity. I'll try not to fry my car again. Thank you all for your help. I have no idea why that happened there were no signs of burns or smell of burning...

I have a 1975 slant six Dart I was doing work on. I attached the negative terminal and while I was tightening the positive terminal my wrench hit the metal battery bracket, shorting out. Now my car has no power anywhere. Everything in the engine bay is okay; battery, starter relay, fusible...

Looking for an overdrive a833 to swap into my 1975 dodge dart. Looking for an A body, B/E body, or truck trans. In the Easton Pa area and will be at the Carlile Nationals in June.

I have a 1968-1969 8 1/4 2.73 open dif rear end presumably out of a big block charger. There is no grinding noise, and the axles both move freely. The brake assembly is present but I do not know if it works. Cannot trade right now because I am at a university across the country, will be...

I bought this tach at Island Dragway about 2 months ago. I wired it and got nothing, popped off the back cover and saw that there is a disconnected wire. Does anyone know how this should be wired? I know as much as much about electrical as I do astrophysics. Squat .