Mcfarlrm's latest activity
-
Mcfarlrm replied to the thread Wix Oil Filter.Also, I will be running a new high volume Melling pump. Anything to consider when choosing a filter? -
Mcfarlrm replied to the thread Wix Oil Filter.May have an issue with header clearance. Are there any Wix options that would work with roughly a 3.5in or less height?
-
5 quarts with a 51515 (standard length) May be a little less oil with the shorter filter. May be an oz. or two. Not enough to worry about.
-
Mcfarlrm replied to the thread Wix Oil Filter.Same oil capacity when changing the oil?
-
What is the correct Wix filter for an LA 360? I see both 51068 and 51515.
-
Mcfarlrm replied to the thread QA1 Recommendations.Sounds like a 2" drop option is the way to go here. This set up will be strictly for road use. No autocross/drag racing. Any suggestions...
-
a 2" drop (short answer) will allow you to lower your car 2" while keeping the same suspension geometry. HDK uses this to not only...
-
@HemiDenny would probably be the best source of information on this. The various levels of drop will effect suspension geometry- bump...
-
@72bluNblu @Mattax @autoxcuda can more than likely help with your questions
-
Mcfarlrm replied to the thread QA1 Recommendations.Appreciate the info. Looking for a full swap. Open to suggestions outside of QA1 as well.
-
Mcfarlrm replied to the thread Procar Seat Brackets.Good to know.
-
Mcfarlrm replied to the thread Procar Seat Brackets.Appreciate this. Looks like 81432 states its for 67-75 dart, 70-76 Duster and 67-76 Valiant. Procar's website is saying 81340 for the...
-
Mcfarlrm replied to the thread Procar Seat Brackets.I see a few options with the difference being bolt patterns. Driver side 81344 (12 1/4in x 12 1/2in bolt pattern) and 81340 (18in bolt...
-
What are the correct Procar seat brackets for 80-1400-51 seats in a 68 Barracuda?
-
Looking at the front coilover conversion kit for my 68 Barracuda. Any pros/cons going with either the 0-2in or 2-4in drop option? What...