Recent content by MeMopar

Hi, guys. I am looking for advise regarding console shifter boot. I know there is one that is a replica of the original part, however due to my current location, I can only have access to límited vendors (amazon, more likely). That is why I am looking for something like a hurst or csi brand...

1972 Dodge Demon A833 Console shift lever

Hey, guys. I have been looking forward to get the shift lever rubber boot that goes in the console. However, prices go from 90-100 bucks. So, I was wondering if the hurst 1147494 would fit. If not, do you know which one can work? Thanks

Thanks!!! I will leave the 22" there then and, if I need to install the other one, I will ask for morw help...

Thanks a lot for the reference... first thing I have found wrong is that I have not the appropriate shifter...

Mine looks similar to that one

hope you guys can help me out with this doubt: Currently, and because it was the car cane with, I have a 22 x 22 x 2.5 radiator which seems to be more suitable in a /6 engine. However, I managed to buy a 26 x 22 x 2 radiator which came from a duster. Question is: will the 22x22 be enough for...

hi y'all. My car used to be a non-console car but I decided to install a center console and now I have certain issues. First, I do not know if console is supposed to sit that far and that tall fron floor (see pics for reference). If this is not the way it is supposed to be, can someone please...

I guess it is dumping fuel. Last time I reached home and switched off the engine, and it tried to re-start again with the switch in off position... I will start by advancing timing, searching vacuum leaks and see if carb is pouring gas into the engine after being parked... but at the same time...

Actually I took it to a "mechanics" and the guy told me they retarded time a bit (dunno how much)... I will double check timing issues. Thanks for the tip

Here's what she does: Hard starting. Takes a while for she to idle by herself - need to be pressing gas pedal for at least 2 minutes or she dies. Once she is ok, when engaging 1st gear, it feels like she is going to stall on the spot, like like of power. Once I am on my way, she is fine, but if...

That comp sounds much better... I guess it will be the one I buy... thanks, man...

This is how she sounds as of today: I was thinking something like this: Mopar Perf. ''Purple Shaft'' Hydraulic Camshaft Kit Or something similar... what do you think?

Thanks! This is the RC. Currently, she is running on D60r/D44 front w/4.56, 8" lift and 42" tires in 18" rims. NP435/NP241 and stock 360 which used to be TBI, but I made it carb'ed. I have here at home sone stuff I will install by march this year: D70 rear, D60 front, both w/5.13...

Thanks for the props, everyone... @BlueDream Exactly! I think the engine is over-cammed. Several components were bought taking into account the engine -like valve springs - but sone others are a little above stock specs. Now, my dilemma is if I should stay with this cam and upgrade the rest of...