Separate names with a comma.
Anthracite with black stripe around the back. Hood and possibly some black stripes on the sides.
You can see how far it is off since the original slots are not used.
[ATTACH] [ATTACH]I welded on extensions to mount it.
The hood needed a lot of fitting/ sanding.
The inserts were mislocated by 1.5" too far forward, so I welded some extensions to the hinge arms and...
need to get the right wire to replace that section.What gauge is it?I'll probably go to a one wire gm alt in 6 months or less.I have a...
This is how much melted.[ATTACH]
Lucky I didn't smoke the whole system.I'm less than a week from being on the road, having to re wire the whole thing would of been...
Continuity test beeps on both field terminals.
Positive to field, no beep.
Field to body.
Square back, yes.
I bought a new Alternator from rock auto, slapped it on there. It smoked one of the field wires. Flipped the field wires around,...
The passenger side hinge, the spring came off.
The drivers side was still on, had to un spring that one so I could close it. Plan on putting...
Yes. [ATTACH]Still need to remove some material, straighten it out, open it a little more.
I live in the high desert. No point in cleaning it off until it's ready for the road.
It still needs to be trimmed and hood pin holes drilled.