Recent content by mohni

Thanks a lot. My tyres are skrewed in the wheels. That are weld Racing. Cal Tracs are with a little gap this Weekend. I think to that this could be much better. But Its a lot try and error

I do the Burnout in second Gear at 5500-6000RPM

Thanks again to everyone who gave me tips. I adjusted the suspension a bit and rode with the clutch tamer for the first time. I had some really good starts with the tamer, but you could already smell the clutch. So I backed it off a bit. You can also see in the videos that the engine is bucking...

Hey guys, unfortunately, some time has passed. But I still wanted to tell you how the last race went. It all started really badly. First, a tire puncture, then I noticed that I had no power above 4000 RPM. I needed all the qualifying runs and two elimination runs to adjust my carburetor for the...

Yes i have slant 6 torsion bars.

Feel free to Tell me. I do Not laugh ;)

Hi Guys, so the last Race for this year is next Weekend. I have lowered the rear to Stock height. I keep the Shock Settings from the Last Race. Cal Tracs are now with a small gap in the lower Hole. Clutch Tamer is in place ;) But i think i dont understand the tamer Settings at this moment

Also mountet in lower Hole? Stick Shift Car?

It is a bit difficult because of the CalTracs and the 3inch movement of the Rear spring.

The Timer is sitting in the Garage, Not in the car. Time was not enough too Put in before Race. The next days i try to lower the Rear for a better IC

Thanks a lot. I think it is like timinator says. no real weight transfer. the car hooks, but no stand on the rear tyres. Battery is in the back already

Looks a Lot better as before, but still Wheelspin and rear hopping

Hello everybody. Here some Updates: I run 11.1 all 6 Races at the Weekend. No PB, but still good. Front Suspension: Compression 18 Clicks Rebound 2 Clicks Rear: Rebound 17 Clicks Compression 4 Clicks Cal Tracs Lower Hole and 1 Turn Preload. Tyrepressure 11,5Psi Still Bad 60ft with wheelspin