Moparbaker's latest activity
-
Moparbaker replied to the thread Trans leak up front.Okidoki, thanx! Well the car was parked on flat ground & there was no leak before I came there, clean ground & that's more than ome can... -
Moparbaker replied to the thread No Valiant Love?.Bought my first day after x-mas -78, raced it a lot, fast thing with its slant that I don't have much clue what was in it but I won over...
-
-
In 2012 I swapped the -77 318 & 904 for -89 roller cam 318 & A500 & replaced all seals, new frost plugs, engine + trans oils & filters &...
-
The two '89 318s are LA roller motors. The last year for the LA 318 was 1991, after that they were replaced by the 5.2 Magnums. The...
-
I have 3 318's, 2 from -89 roller cams in cars & 1 solid from -77 sitting & while I was cleaning the roller lifters in one a guy said...
-
Moparbaker replied to the thread No spark....I ohm-measured two not connected modules / "ECU"'s; one original MoPar & one chinese (I think the chinese is called "Standard") & got...
-
-
Moparbaker replied to the thread No spark....Well in my simple mind I reckon I need to know how to measure the ECU non-connected.
-
Moparbaker replied to the thread Today is 3-18 of 2024. HAPPY 318 DAY!!.One's a -56 New Yorker & one's a -55 Studebaker & yep; it's LPG but runs on gas also if I want.
-
Moparbaker replied to the thread No spark....By "coil tower wire" you mean the one going to the distributor? Done that at first, no spark from the coil, that's where I get pussled...
-
Moparbaker replied to the thread Today is 3-18 of 2024. HAPPY 318 DAY!!.Didn't see this unti... eh... just now... here are my two:
-
-
Moparbaker replied to the thread No spark....It's a single resistor & I've put extra ground wire from the module to the engine, sharp starlock washers & all. I don't get spark fronm...
-
-
The HEI that some ex owner put in died (no big surprise) so I put MoPar original stuff in & it fired right up & ran good! So I drove it...
-
Moparbaker replied to the thread Non ATF+4 in a A500 trans..?.So it does make it easier to understand who responds to if the whole sentence is there, not just the name? I thought "TC" had to do...
-
Moparbaker replied to the thread Non ATF+4 in a A500 trans..?.Hmmm... So what you're saying (or rather writing), Ant, is that the overdrive is the reason for the need of +4..?
-
Moparbaker replied to the thread Non ATF+4 in a A500 trans..?.Ah, that sure makes life a lot easier since not every shop has +4 in stock. :thumbsup:
