Recent content by mrbubbles

  1. M

    Low MPG

    The cam is Summit Racing SUM-6901
  2. M

    Low MPG

    Thanks for the replies.
  3. M

    Low MPG

    not running huge jets. stock dist. vac advance is per chrysler spec.Carb tuned to edelbrock specs. PCV is hooked up correctly
  4. M

    Low MPG

    I need some advise. I have a rebuilt 273 .30 over. I am running Edelbrock 1806 650cfm 4bbl, cam shaft slightly above stock, 355 gears with posi and a stock converter. I am getting about 8MPG:shock:. Does anybody have some advise on how to increase the mileage?
  5. 1967 Plymouth Barracuda conv

    1967 Plymouth Barracuda conv

  6. M

    Englishtown 2009?

    It was a good weekend at Englishtown. Not a big turn out on Sunday at all. The only really bad thing that happen to me was this. http://www.forabodiesonly.com/mopar/showthread.php?p=540006#post540006 I need some help Steve
  7. M

    Hood Hinges 67 Barracuda CONV

    After a good weekeend at Englishtown. It took a turn for the worse on the way home. While driving home my hood poped open and bent the hinges back. The hood is ok but the hinges are shot. Figures as soon as I got the car ready for the season this has to happen. I am in need of 2 hood hinges for...
  8. M

    Englishtown 2009?

    I will be there on Saturday and Sunday depending on the weather. Plus it is local for me too.
  9. M

    Englishtown 2009?

    I missed last year. Rebuilding the motor and trans took longer than I thought. The new rear is just about done another week or so and I should be good to go. I used to go to the shows about 20yrs ago with my 64 dart conv. Now I have the 67 barracuda conv. The show and swap meet have gone down...
  10. M

    273 Commando Valve Covers and air cleaner

    I have these up on ebay. http://cgi.ebay.com/ebaymotors/67-69-Formula-S-Hi-Po-Valve-covers-Barracuda-Cuda_W0QQitemZ190282555300QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item190282555300&_trksid=p4506.c0.m245&_trkparms=72%3A727%7C65%3A12%7C39%3A1%7C240%3A1318
  11. M

    Hi Po 273 valve covers

    I used VHT Wrinkle finish. You can find the paint here. http://www.jegs.com/i/PJ1/322/SP201/10002/-1
  12. M

    Can anyone recommend a reliable transport service?

    I used Intercity. The car went from MI to NJ in 2 days. They were very reliable. they gave me updates every step of the way. The Car arrived on time. I would use them again.
  13. M

    Shroud A Body

    I was told on another site.. 'The fan shroud you're looking for is Mopar Part Number 2785312. It's a one year only (67) fan shroud" Sound like it is tough to find. I am still looking. Steve
  14. M

    Fan Shroud

    I have a 67 barracuda 273 V8 no A/C. I have a radiator #2785973 in there now. I am not sure if this is the right one. I am looking for a shroud to go with this radiator. Does anyone have one or the correct part number of the shroud. Any help would be appreciated Thanks Steve...
  15. M

    Shroud A Body

    I have a 67 barracuda 273 v8 no a/c. My radiator # is 2785973. I am looking for a fan shroud. I am not sure of the part # of the shroud. I do believe that 2785614 might fit ths radiator. If not what part # would fit. Any information would be appreciated. Thanks Sreve
See more
Back
Top Bottom