Recent content by MRL777

Yes Dano, CVF Going to go stock pulley, Hayden clutch and will report back

You were right about the pulley, thicker compared to stock, I should have known better. Still will go with the Hayden clutch as well, did you use the stock bolts? Looks like next I need to read up on the reducer bushing too. Again, thank you for the help! Little by little .........

Thanks guys, I will check out that Hayden clutch Not sure of part number on there now, maybe when I get it off I can see better Happy Friday!

1970 Dart 340 Swinger New pulleys for PS added, new OER Radiator, 1700 Flow Cooler WP, 7 blade clutch fan, shroud, but blades are hitting radiator, no room at all. Water pump issue or maybe pulley issue? Pulley alignment seems ok? Noticed 1700 aluminum Flow Cooler WP has longer fan hub...

New bracket did the trick. Clips went right on this time. Thanks everybody!

Well, new biscuit mounts looked right and engine was sitting level when checked with a level, so I removed torque shaft and definitely has a pretty good bend in the BH bracket. Good eye Dano! No idea how it got that way, but hoping it is this simple!

Good to know, thank you. I will follow upon this as I have time to work on the car.

Classic is a good vendor, but anytime I can give Brewers the business, I do. Unmatched customer service. Dan says parts look correct, so will be looking at mounts. Thanks to you all for input.

I see that now, wow. Definitely worth a look. Would be a simple fix too, thanks for looking. Makes sense, thank you.

Is it acceptable to shim/washers at the k frame bolt if needed? Or no?

Did not realize that it could be that much. Starting to think I may need to look closer at the mounts, may have made an error there, not sure yet, thanks

This may be very helpful, thank you! It does look to me like the ball being higher could work. There were no shims on trans mount. Frame bracket is stock I believe. Since Dan originally told me everything is the same from the 3 to 4 speed (if I understood him correctly), and from pictures of...

That is part of my problem, first A body and I didn't think to take pics down there beforehand, so had no reference and could not find pics online.

Very possible since I just had it out. Will give me something else to check! Thanks