Newbomb Turk's latest activity
-
NNewbomb Turk reacted to 4eighteener's post in the thread Someone needs to start re-casting 340 blocks with .Dan was talking about going to see some 318 car last week an hour away with air conditioning, but haven't heard if he came home with it...
-
NNewbomb Turk reacted to Dan the man's post in the thread Someone needs to start re-casting 340 blocks with .I think that they are wanting to due away with the older cars.
-
NNewbomb Turk replied to the thread Someone needs to start re-casting 340 blocks.And it’s not just blocks. It’s hard to get even simple stuff any more.
-
NNewbomb Turk reacted to mopardude318's post in the thread Someone needs to start re-casting 340 blocks with .I dunno. I’m buying a Ritter block soon. **** cost what **** costs. It ain’t gettin cheaper. I’d be happy as long as **** is available...
-
NNewbomb Turk replied to the thread Lean idle. Rich cruise..From 1979… Look at the slope of the curve.
-
-
NNewbomb Turk replied to the thread Someone needs to start re-casting 340 blocks.Shiiiiiiiiiiiiiiiiiiiiiit. I’m not sure how old you are but in my lifetime the Chrysler guys were and are the worst at spending money...
-
NNewbomb Turk replied to the thread Penn Grade (Brad Penn) oil.I posted a video about this exact thing after I was called a liar and a bunch of other ****. It’s in the Performance forum. It’s not...
-
NNewbomb Turk replied to the thread Lean idle. Rich cruise..I guess the question is why you think a curve would slow the car down? The absolute worst case scenario would be that the car ran the...
-
NNewbomb Turk replied to the thread Lean idle. Rich cruise..It’s SLIGHTLY different going from the dyno to the track. It’s not like it’s some massive change.
-
NNewbomb Turk replied to the thread Lean idle. Rich cruise..That’s what you have to do. Account for it.
-
NNewbomb Turk replied to the thread Solid rollers with off set push rod hole issue..I have never seen anything adverse from running offset lifters. Like I said, when I see that I look at spring load and heat treating...
-
NNewbomb Turk reacted to pittsburghracer's post in the thread Deals are still out there guys. And this deal on a Victor340 had perfect timing. with .My buddy called and asked if I was interested in a Victor340 for 250.00 and I quickly said no I have a brand new one on my shelf. Then I...
-
NNewbomb Turk replied to the thread Lean idle. Rich cruise..I know some guys who weren’t traction limited were adding 3-4 degrees of timing at the hit to get the car moving and they pulled it out...
-
NNewbomb Turk replied to the thread Lean idle. Rich cruise..When locking out the timing did you account for retard? Timing stability is easy to get if you aren’t married to some way of thinking...
