Recent content by Newolddart

So an update on this... Listening to all of your suggestions... I checked my crank and front cover for marks and found some on both. I remarked the crank because it was unreadable. Turned the car over with vac disconnected to check intial and it showed about 26*... really didn’t believe it and...

You gents are great! It’s now my work week but I’ll try plugging away at her and get updates. The rollers are Jegs 350 1.6 ratio. The front cover is post 70 with the serpentine belt setup. There is timing pointer off the front cover that reads a tdc and 5 ticks above and below, but the...

Old cars are new to me so hopefully y’all can help me out... Bought the car some time ago now and am working through lots of random issues. 69 Dart 360 Magnum swapped with a custom cam (no specs but appears pretty mild), edlebrock heads with 350 roller rockers (relashed), hei ignition...

Long shot! Looking for a M1 Magnum single plane (4bl) carb intake. Miles don’t matter, just looking to rework it a bit to setup for nitrous. Believe this is the part number P5007380AB Thanks!

For anyone still wondering on this thread or for future reference... I bought a couple Moroso 3/4-16 oring plugs, used some pipe thread sealant (despite it being an oring, I know) and tightened her down. Drove her around 3 times since with absolutely zero leaks!

I’ll find out because that’s my plan, now knowing the threads.

Found out that my 727 is not leaking from the pan gasket (3 gaskets later...) but from the neutral safety switch. It was loose and I tightened it up but it still appears to be dripping slightly from the threads after sitting for some time. It is not wired on my car (there is another wired...

Been lurking for some weeks and finally decided to join the group! My name is Trey and I am local to the Phx,AZ area. I’m a member on several other modern mopar forums and have some pretty extensive knowledge in that arena, having built and drag raced modern Challengers and Chargers for about...