Recent content by OllieDemon45

The offset shackle kit I bought came with 1/2” bolts

Does anyone have part numbers for the eyelet bushing for the rear? I just received my springs from Espo but they do not have the small end bushings for the rear. Any help would be great.

The spring offset kit was a pretty easy install once the old brackets were removed. I kind of like the white wheels too.

Happy to say it’s finally ready for the road again, after a good cleaning. Thanks again to everyone that helped me on this project! It was nerve racking once I got the rear end back under the car and wondering if the wheels and tires would fit. Everything fit perfect and I love the way it looks...

MBM Master Cylinder (Disc/ Drum) This is the one. So it's 1.125 bore.

I was having issues bleeding my new rear brakes and found my master cylinder was leaking right at the firewall. Took it off tonight and found it the seal on the piston was damaged. Does anyone know if they make a rebuild or where i can find this seal?

Might be a dumb question, but where did you guys get your Lug nuts from? Wheels and tires are ordered, now i'll need a set of black lugs of decent quality too. Thanks

I dropped off my 8 3/4 today at the shop, hopefully it will be ready in a couple weeks. I have decided on the Enkei Raiji wheels and Nitto NT555 tires. Fronts will be 245/40/18 tire on an 18x8.5 +35 wheel. Rear will be 275/35/18 tire on an 18x9.5 +15 wheel. Do these sizes all seem reasonable? Or...

That's my next step. Espo has great prcing for the springs and Ubolts/hardware as i just talked to them. Bad part is they are around 3 months turnaround. I'm debating just running my old springs until then.

I need some for my Demon as well, Espo's website says 3 months waiting period, Mancini Racing is sold out. Been looking on Ebay for some Factory type replacements but not sure if they are legit or not.

I figured as much. the springs will be moved in the 1/2" but didn't figure that would be enough.

How much of a spacer would i need in the rear @72bluNblu ? I found another style that is a 9" wide and a +24. But i like the AMR wheels better.

Yes, any help is greatly appreciated? My 8.75 is getting the BBP axles along with new gearing and a PowerLok unit. Next up is wheels, and the struggle has been real trying to find a set i like. I really want to make this style like you have work with my setup if anyway possible. Thanks again.

are the rear wheels +30? If so, did you end up using. Rear spacer? I will be using the rear spring relocation brackets but have drum brakes. I really want to make the wheels that you have work in my Demon. Your car looks great!