Recent content by olskool

Have a mid 1970's 360 with 727 trans. This is in a 1948 Plymouth Coupe. Trying to figure out why it's overheating. What's going on is it warms up fairly quickly when first starting and idling. Within 4-5 minutes the temp gauge is reading 200+ degrees. Kick it off high idle and it still...

Working on a 1973 Dodge Dart 340 Sport. Purchased a water pump pulley #2951836 and a crank pulley #3671320. From what I read they will fit this car but they hit and are out of alignment by about 1/4 inch. I understand the 69 and earlier used a cast iron pump but this is correct with the...

Working on a 1973 Dodge Dart 340 Sport. Aftermarket Northern aluminum radiator is installed. I'm trying to figure out the upper and lower radiator hose. I'm not finding hoses that fit. The openings in the radiator are on the upper right and the lower left. From what I can find in pictures...

Send me a few pictures and carb number please. Also price with shipping to 53032. Thanks.

I have a Holley also that came with it. However, the airhorn is damaged. I did find another for $20 but I'm waiting. From what I have found out is the carter will work and will supply enough CFM for normal driving. The Carter 318's were 280 CFM and the Holley's on the 360's were 320CFM so...

Ok, first let me say I don't know a lot about Mopars, especially 60's-70's. This is my issue. I purchased a mid 1970's "318" used guaranteed to be a good running engine. So, cleaned it up, looks pretty now with fresh paint and all new gaskets, etc….. The carburetor that came with was a holley...

Thanks. I have found one.

If the base mounting is the same as a mid 70's 318 with a Holley I would be interested in this carb. Was this from an auto trans or is it a manual set up. I have a auto so need to make sure linkage is correct.

Can you send a picture. Good condition? How much?

Looking for a drivers side manifold. I have a 1976 318 so it has to fit that. Can be from most a body cars and years. Not worried about specifics as it's for a custom car. Send me price and a picture. Thanks.