OK checked every fuse in the holder and had signal on and had power on both sides of fuse, was only checking stop and taillight fuses from the beginning then when I got to the radio fuse checked one side then checked other side when I touched it with the meter it started flashing, cleaned up...
OK if I run power to hot side of flasher they do work! the thing I can't understand is why it has power to flasher until you turn signal on then nothing! Would it be ok to just run a new wire from fuse block to flasher so it is hot when the key is on?
Still having problems, if brake lights are on and you turn either signal on the brake light goes out. left and right both do it. Ran power to each light front and back at switch connector and each light worked fine all 4 corners.