PRH's latest activity
-
I expect all this talk about rocker shaft orientation is premature. The shafts WILL allow oil out, upside down AND backwards. It wont be... -
PRH replied to the thread Valve Spring Pressure Discussion.Uuuummm…..”Crane” 98511?
-
I'm working with via phone call and text. We're making progress. I asked him for pictures of the other end of the shaft. We'll go...
-
PRH replied to the thread No oil thru rocker shafts.The Cranes have a pretty good size relief cut for the lock nut style adjuster. The Crane rocker also has a groove cut around the ID to...
-
-
PRH replied to the thread No oil thru rocker shafts.Are these the rockers in question? If so, they look like 273 rockers, which are different than the cranes I have used. It’s not much of...
-
-
PRH replied to the thread 360 clicikng valve train.Has it been determined if the shafts actually have notches? If not, we don’t know if they’re on wrong or not.
-
PRH replied to the thread 360 clicikng valve train.I’m sure this will stir up some shite……. But……. If there is truly “NO” oil coming out of the rocker area with the engine running, I’m...
-
PRH replied to the thread 360 clicikng valve train.The above post isn’t meant to be harsh, it’s just laying out the realities of the old car hobby. Especially ones that have been...
-
My advice is to sell the car and buy a Prius. If you’re not mechanically inclined at this point, that’s ok. But to own an old vehicle...
-
PRH replied to the thread Horsepower question.You’re going to need to post a sheet with the data on it(not a tq/hp graph) if you want any kind of even remotely meaningful assessment...
