Recent content by red68cuda

Are these sold?

Need screw in end plugs for my rocker shafts. Does anyone know where I could get some or a part number for only the screw in end plugs for these, if there even is one.

My large port commandos with offset rocker shafts and stands with 1.6 ratio MP roller rocker arms. My Edlebrock Airgap and hand polished demon carb. My hand polished 8 blade water pump (what a pain that was) and hand polished timing cover. Restorable grill and header panel the other side...

My first car in 1976 it used to look better, but never as good as it will when I am done. Caliper brackets and calipers came from a basket case Cordoba that also donated the deeper backing plates from the 9 1/4 rear for my 8 3/4 for wider rear drums. Using the 73 for the larger ball joints...

Started to do some work to it when my son was 16 as father/son project put together a k frame from a 73 dart with new tie rod ends, biggest front sway bar available, urethane bushings and disk brake setup with 4 1/2 inch bolt circle with all right hand threads. We found some 8.75 inch axles out...

I am in the process of gathering parts to revive my first car that I have owned since I was 16 back in 1976. My father bought two cars, a 67 notch back barracuda that had the front clip removed because of an accident that had no title, and a red 68 Barracuda fastback that had no motor but had a...

Still interested if the correct ratio. If you can't find the ratio on the ring gear, count the teeth on the ring and count the teeth on the pinion. # of ring teeth divided by # of pinion teeth = ratio

Depending on the gear ratio, assume the gears come with it, I also may be interested.