Recent content by Riggins44

This may be a dumb question but I have never dealt much with suspension on my car. I am not happy with the ride height of my 68 Dart GTS and was looking into replacing the leaf springs or getting extended shackles or front brackets to raise it a bit but in considering replacing the springs I...

I too had the turn signal lever loosen up and flop around. I pulled the steering wheel and just retightened the screw that holds the lever in place and I haven't driven much since I did it so I don't know if it will loosen up again or not. The turn switch was replaced by the previous owner so...

I have a 68 Dart GTS with drum brakes and 14" stock wheels. The front tires are BFG's and are 215/60/14 and fit just fine. I am going to do 2 upgrades, first is wheels/tires and then a disc front brake conversion. First step is I'm replacing the wheels/tires. I was thinking of going to 15x7 up...

Need some info from those out there that have done it. I have a '68 Dart with a 383 in it with headers. I need to replace the oil pan. I looked up the correct A body big block oil pan and ordered it and I crawled under the car to have a look. It would appear that I need to remove the steering...

Gracias Amigo. I ordered it.

I think the 3 terminal relay for the dash lights is bad. I removed it to get a p/n or info on it but there is nothing on the relay to tell me what to order. Does anyone know where I can order the replacement relay?

Okay. Boought the 68 Dart GTS and it had a few minor electrical issues. I fixed the dome light issue and got the parking lamps to work as well. Still having a strange problem with the flasher and signals. The signal lamps work correctly but the flashers do not work correctly. In fact, the only...

Hi y'all. Just introducing myself. Haven't been in the car game in 30 years but I got old and wanted something to work on. I bought a nicely restored 68 Dodge Dart GTS but it till needs a lot of touches and tweaks. I see there are so many of you with so much knowledge on here about almost...