Has anyone been able to confirm if they are still available from Aerohead?
From Australia and was planning on getting a pair for a mild 318 as they are ideal and cheaper than eddies too.
Thanks for that. Not really what I am after though as I don't want those holes to be visible otherwise I would have already bought a set.
I know Ansen Sprint and Appliance used to make a wheel that would suit, just can't find any.
Hi guys,
Question from down under, chasing a set of 15" slot wheels that best match the rim attached below. Unfortunately new engine requires more traction and I can't seem to find a drag radial in a 14 to suit my needs so its an excuse for biggers wheels and hopefully a little more dish on the...
Hi Guys,
Chasing a High Rise Tunnel Ram to suit a SB with W2 Oval Port Heads.
Will need assistance with shipping as I am in Australia.
Any help would be appreciated.
Cheers,
Rosco
Thanks for all the advice guys, lots to read and understand!
The 318 I'm building for the car over here <--- will be with the LA-X heads and 2.02/1.6 valves since I've had them for a few years sitting in boxes waiting. They will have the KB167 flat tops and will deck the block. I'm hoping I...
The more I'm reading and learning on here (which is a lot) I'm getting the understanding that using 340/360 heads or any heads with 2.02/1.6 valves is too much for a 318.
Now I'm already planning on putting a set of LA-X heads with 2.02/1.6 onto a 318 (was originally building a 360) I will...
Interesting. Depending what the cost would be, I'd still consider the kit and get the downpipe or another modified to fit.
I wonder if I could just have the top tube facing the other way (away from the master and steering box for us down here).
Any rough idea what the cost will be?
No chance I'll be putting the motor together but I'll definitely let the engine builder know incase he hasn't dealt with the KB pistons.
I have HV melling oil pump but I've read that they aren't required and best to use a standard one. Would I be better off with a standard oil pump and get...
Just ordered myself the XE268H frosty so I'll save the Thumpr Cam maybe for next motor.
Nice build with the VC, cool looking car.
Judging by your numbers, I wouldn't be surprised if I make 380hp.
One more question guys as I know stuff all compared to you guys about this stuff but how much do you think that Camquest has overestimated the power I should expect. From the reading up I don't think I would make 400hp or over as this suggest.