Recent content by scarlette1969

Well i just figured it out. I pulled the connector off the ignition switch and directly jumped the connections and it sounded like its supposed to. Its the ignition switch not making a good connection. Thanks for the information though good things to know!

Hey guys I'm working on a 69 dart /6. I've been going through the wiring system and trying to correct a bunch of wiring problems the previous owner hacked up. Nothing major just getting lights hooked back up and it went great. My problem is my starter went out... or so i thought. It started...

So i upgraded my alternator to a 60 amp but kept my old voltage regulator. I've learned that it is only rated to 46 amp. It worked for a while but its been surging and its extremely apparent when using my head lights. It finally gave way and I'm running off the battery now. My question is if I...

Thank you everyone. i have performed the wiggle test and and getting some progress. I'm going to continue fiddle around with everything until i get everything working.

Awesome thanks for the suggestions I'll try all this in the morning. I like the idea that i might just have to do a bit of wiggling on the connections. Would any of this stop power from going from my ignition to the starter?

Hey guys, I'm really new to wiring but i decided to pull my instrument cluster to replace my lights and put in a new voltage regulator to try and problem solve my gas and temp gauge from not working. I got all the new lights in and cleaned everything up. I put everything back in and got it all...

i was able to finally get back into town and got the window in. i had to remove the cat whiskers and loosen the wing window to do it but i have glass again. thanks for all the tips!

i have a 1969 dart 4 door. i have the door panel off and have access to the regulator and everything. the problem i have is i cannot fit the glass through the top slit and have it fit into the channels. the angle's are all wrong. so my question is will i have to remove the exterior door panel or...

Hello everyone, my front passenger door was broken out a few weeks ago but i was able to find some new glass. anyway i have the window and am ready to install it but i cant make the glass fit into the channel coming from above. do i have to remove my door skin to get this window in? thanks for...